"*" indicates required fields
Private Well Service in the Erwin Area
Most of Erwin’s town limits are served by Harnett Regional Water, but water service can vary depending on where the property is. The Town’s land-use plan notes that some areas along the US 421 corridor do not have the same utility access as the more developed parts of Erwin.
Private wells are also still permitted throughout Harnett County for properties that rely on their own water supply. The county has separate applications for new well construction and well abandonment through Environmental Health.
For Erwin-area properties that depend on a private well, A&T Well and Pump can help with pump failures, pressure issues, water quality concerns, and other problems with the well system.
Well & Pump Services in Erwin, NC
A private well can lose pressure, stop producing water, or start acting differently for several reasons. The pump is only one part of the system. Pressure tanks, switches, controls, piping, electrical components, treatment equipment, and conditions inside the well can all affect how it works.
At A&T Well and Pump, we provide the following well and pump services throughout the Erwin area:

Well Pump Repair
No water, low pressure, sediment, or a pump that keeps running can point to a problem with the pump or another part of the well system.

Well Pump Replacement
If an aging or failed well pump can no longer be repaired, we can replace it with a pump that fits your existing system and water needs.

Well Service & Repair
Problems with water flow, pressure, equipment, or the well itself can require a closer look at the complete system.

Well Abandonment
Unused or damaged wells need to be properly closed. A&T Well and Pump provides temporary and permanent well abandonment services.

Trenching
We provide trenching for well lines, new construction, remodeling projects, and other water-line needs.

Well Sanitizing
If bacteria or outside contaminants enter the well system, sanitizing can be used to treat the well.

Water Filtration
Water filtration can address sediment, staining, unwanted taste or odor, and other water quality concerns based on what is found in your water.

Well Video Inspections
A downhole camera gives our team a view inside the well and can help identify casing damage, obstructions, lost equipment, and other problems that cannot be seen from the surface.
Watch for Changes in How Your Well Is Working
A completely dry faucet is an obvious problem, but well issues do not always start that way. Changes in pressure, sound, water quality, or how often the pump runs can also be signs that something needs attention.
You may notice:
- No water from faucets
- Low or inconsistent water pressure
- A pump that runs continuously
- Frequent pump cycling
- Sputtering faucets
- Sand or sediment in the water
- Cloudy or discolored water
- Changes in taste or odor
- Unusual noises from the pump or pressure tank
The pump itself may not be the cause. Pressure tanks, switches, controls, piping, electrical components, and other parts of the system can all affect performance.
If something has changed, our team can inspect the well system and help figure out what is going on.
Why Erwin Property Owners Call A&T Well and Pump
A&T Well and Pump has been serving customers since 2006 and provides private well service throughout our service area, including Erwin.
When water stops or pressure drops, we do not assume the pump automatically needs to be replaced. Our team can look at the pump, pressure tank, controls, piping, and other components before recommending the next step.
Having Trouble With Your Well?
Tell us what you’re experiencing and we’ll help determine the next step.
What Our Customers Say
See what customers have shared about working with A&T Well and Pump:
Well Service Throughout Erwin, NC
Erwin sits just west of Dunn along US 421, with NC 55 entering from the north and NC 217 and NC 82 connecting the town from the south. The Cape Fear River runs along the southwest side of town, where NC 217 crosses the river.
Water service can vary depending on where the property is. Most of Erwin’s town limits are served by Harnett Regional Water, while some properties elsewhere in Harnett County rely on private wells.
A&T Well and Pump provides private well and pump service throughout the Erwin area and surrounding communities.
Not sure whether we come to your property? Call (919) 980-0981 and we’ll let you know.
Erwin Well & Pump FAQs
Do you provide 24/7 emergency well pump repair in Erwin?
Yes. A&T Well and Pump provides 24/7 emergency well service in Erwin for problems such as no water, pump failures, sudden pressure loss, and other urgent private-well issues.
Are private wells still used around Erwin?
Yes. Most of Erwin’s town limits are served by Harnett Regional Water, but private wells are still permitted throughout Harnett County.
Whether a particular property uses public water or a private well depends on where it is and what utility service is available.
Who provides public water in Erwin?
Harnett Regional Water provides water and sewer service in Erwin. The Town’s adopted land-use plan states that most of the town limits are served.
Is public water available everywhere in Erwin?
Not necessarily. Erwin’s land-use plan notes that while most of the town limits are served, parts of the US 421 corridor have more limited utility infrastructure.
For a specific property, it is best to confirm availability with the appropriate utility provider.
Does Harnett County require a permit for a new private well?
Yes. Harnett County Central Permitting lists a New Well Construction Permit through Environmental Health.
Does Harnett County require a permit to abandon a well?
Yes. Harnett County also lists a separate Well Abandonment Permit for wells that are being permanently taken out of use.
Why did my well water pressure suddenly drop?
Low pressure can involve the pump, pressure tank, pressure switch, piping, electrical components, or another part of the well system.
Our team can check the complete system to help narrow down the cause before recommending repair or replacement.
Can an older well pump be repaired instead of replaced?
Sometimes. It depends on what failed, the age and condition of the pump, and how the rest of the well system is performing.
At A&T Well and Pump, we diagnose the problem first and determine whether repairing the existing equipment or replacing it makes more sense.
Need Help With Your Well in Erwin?
If your water stops, pressure changes, or your private well system starts behaving differently than normal, A&T Well and Pump can help find the source of the problem.
We're available 24/7 for emergency well service throughout the Erwin area.